Pro Water Filter (Pack of 3)

Product Dimensions:

• HydroTub™ - 61" x 30" x 31" - 132g capacity - 23lbs
• HydroBarrel™ - 37" x 41" - 132g capacity - 22lbs
• Standard 0.5 HP Chiller - 11.75" x 14" x 14.25" - 43lbs
• Pro UV 1.0 HP Chiller - 25.5" x 14" x 19.75" - 78lbs

Accessories included:

HydroTub™ & HydroBarrel™

• Carry-All Backpack
• 3" Thick, Inflatable Cover with Quad Lock Cover
• Chiller Ready, Pre-installed Quick Connect Ports
• Pump for Cold Plunge & Lid
• Water Temperature Gauge

Standard 0.5 HP Chiller

• 1 water filter, inlet and outlet hose assembly.

Pro 1.0 HP Chiller

• 1 pre-installed 5 micron filter, 2 complementary filters, 1 pre-installed UV system, inlet and outlet hose assembly.

HydroTub or HydroBarrel?

Each product has its advantages. Both are designed for full body immersion meaning even those up to 6'5 can cold plunge neck-deep. For those looking for a more traditional, meditative tub setup, we recommend the HydroTub™. For those who prefer a more natural, upright plunge or you're limited on space, we recommend the HydroBarrel™. Read more, click here. 

Ice or Chiller?

For those new to cold plunging, we recommend starting with ice as it's easily accessible at your local grocery store, reasonably priced and can help jump-start all the benefits. After a couple weeks of feeling the effects cold plunging has on the body and mind, you may be ready to invest in a long term solution. Ice is a great starting point but can only take you so far in terms of temperature and convenience. For more on cost and how to use ice in a cold plunge, click here.

0.5 HP or 1.0 HP Water Chiller?

There are many options when choosing a cold plunge chiller. We recommend prioritizing by cost, lowest temperature desired, time to desired temperature, cleanliness of water and noise. The cost is straight forward based on your budget. The temperature and time to desired temperature are the most important factors because of the limits both present. The lower in temperature and the faster to cool, the more HP and better tub/barrel insulation required.

The Standard 0.5 HP Chiller comes with a filter to remove debris such as dirt, hair, sand and other fine particles that may be in your water system. As this chiller does not come with bacteria killing mechanisms, this will require replacing the cold plunge water from time to time as well as thoroughly cleaning the inside of the cold plunge.

The Pro 1.0 HP UV Chiller comes with a 5 micron water filter to remove even the smallest of particles coupled with UV sanitation to kill bacteria. The cooling time from setup can be as short as 3-5 hours with ambient temperatures and desired cooling temperature being key factors.

Lastly, the noise coming from the chiller fans may be important depending on where your chiller will be located inside or outside the home. The Pro 1.0 HP UV Chiller emits a smooth, low vibrating noise from the single, large fan in the rear whereas the 0.5 HP Chiller is slightly louder with 4 small fans exhausting heat from the rear. The fans only operate when cooling and shut off automatically when the desired temperature has been met and will stay off up to the temperature set for restart. This is automated and can be adjusted on the digital screen.

Do you offer financing?

Yes, we offer Affirm through Shop Pay. 0% financing is available for up to 12 months for well qualified buyers.